Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS


Related Video

Feedback (2)

We always believe that one's character decides products' quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for Feed Grinding Mills , Bale Buster , Automatic Hemp Flower Gas Dryer , We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.
Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS Detail:

Main Problem Happens for the biomass Pellet Mill:

1. Every brands in the market has bearing inside roller include German and USA brands. You need to lubricate the bearing every two hours and change the bearing every half a month.

2. For horizontal type ring die pellet press, the main shaft is easily broken and hard to repair

3. For vertical type flat die pellet press, the capacity of pellet press is very low and power consumption.

The following is the main advantage of our pellet press:

1. The main shaft is drived by cylindric helical gear.
2. The main bearing is heavy duty branded bearing of high precision quality level.
3. No bearing inside roller, no need of grease lubrication every two hours.
4. Space between roller and die is adjusted and controlled remotely.
5. The carburization for the gear in the heat treatment is up to 2mm, the hardness and wearing resistance is top quality.
6. Germany CNC machine for every components in Pellet Press, the error allowance is very low.
7. The space for Compressed chamber is large, and additional vane to avoid the clog in the chamber.
8. The four lines(instead of five lines) die will avoid the overdue pressure from roller, extend the service time for the roller and die gradually.
9. All the rotated components are lubricated inside the pellet press by the oil pumping externally, and the temperature of oil is lower than 50 ℃ all the time, the span life for the pellet press is extended a lot.
10. The material of roller and die can be selected, for example 40Cr, etc.
11. Compression ratio can be selected based on the different raw material and different moisture For example, the hardwood/soft wood/and moisture is 20%-25%.
12. The power consumption is very low, normally the 1g is 55w, germany machine is 60w-70w. Power saving is 20% more.
13. The inner size of die is bigger than normal machine from china/german/usa, the capacity is higher by 30%.

2. Pellet Cutter (We invent new design of bearing to extend service time for the cutter )

dfg (4)

 3. Helical Gear (the design service time will be 15- 20 years )

1. The Cover will be ss to extend service time for pelleting chamber of the high

1
dfg (2)

7. Two Layers of ring die will extend service time a lot, circled groove will prevent the dust leaking effectively.

 

4. Brand of eletric motor is famous and the speed of the electric motor is 4P/6P

5. Heat Exchange plate is installed to cooling down the oil to make sure temperature is lower than 60 ℃

10

8. Oil Filter to clear up the oil all the time to extend the service time for all the bearing inside.

Note:

1. We did the heat treatment for roller shell is 24 hours instead of 2 or 3 hours. Hardness of surface is up to 61 HRC(same material, longer service time) with 3mm thickness of carbon.

2. All main components are machined by Germany CNC with best accurate

Application: 1. Moisture of raw material: 12%-25%(18% is Premium)

2. Max Size of particle is 10mm (less than 20%)

Model    OSK OSK 55 OSK220 OSK280
Die inside Diameter(mm) 580 780 980
Capacity (T/H) 0.8-1 3-4 5-6
Roller Quantity 3 3 3
main motor power (kw) 55 220 280
Feeder motor (kw) 1.5 2.2 3
speed (rpm) 500 500 500
outline dimension mm 2800x1200x1650 3200x1600x1800 3600x2000x1900
Weight N.W 4500kgs 13200kgs 16800kgs

More from Our Portfolio

142fcf45

2009

 We also use the horizontal ring die pellet press (right now many companies from germany/usa/china still use this type)

df6b2c75

2011

 Firsty try to solve the problem of bearing inside roller.

6acb1b69

2012

We invest the X type of opposite press to solve the problem of bearing insider roller.

a224a922

2015

Horizontal ring die with no bearing inside roller.

wer

2016

 We invent new generation of pellet press

1.Why the vibration of the pellet mill is so serious ?

a.Moisture of saw dust is not stable
b.The adjustment of gap between roller shell and die is not even
c.The compression ratio of die is not correct

2.Why ampere vibrate under the big range ?

a.Moisture of saw dust is not stable
b.Abnormal material is feeded into the pellet mill

3.Why you can not make Money from your wood pellet factory ?

a.Cost of high temperature grease is high
b.Cost of bearing is high
c.Too many times of shut-down every day
d.Cost of raw material is always stable, some from furniture,some from forest.

4.Why the quality of pellet is so poor ?

a.Compression ratio is not big enough
b.Particle of saw dust is not uniform
c.Hole inside the ring die is not designed well

5.Why ash content is so high

a.If wood log is used, whether the debarker is used ?
b.Moisture of saw dust is too low or too high
c.Pellet cooler is not working well.
d.Seive after pellet mill is not big enough.

6.Why ash content is so high

a.If wood log is used, whether the debarker is used ?
b.Moisture of saw dust is too low or too high
c.Pellet cooler is not working well.
d.Seive after pellet mill is not big enough.

7.Why capacity of pellet mill is so low ?

a.Feeding of material is not fast enough
b.Feeding chamber inside pellet mill is not big enough
c.Moisture of saw dust is inproper
d.Compression ratio of die is not correct
e.Die and roller shell is wearing out

8.How to judge the moisture of saw dust by watching pellets ?

a.If pellets has vertical shrinking, that is too wet
b.If pellets has horizontal shrinking, that is too dry.

9.How do you know the ajustment of gap between roller shell and die ?

When the pellets are spreaded on the belt conveyor, if continous, all rollers work well, if not, some of the roller is not working.

10.How many minutes you need to change the roller shell ?

10-15 minutes

11.How many months you need to change the bearing under the roller shell.

6 Months 

12.How many years of guarantee of gear in your pellet mill ?

3 YEARS , Yes this number is correct. 

13.What is the quality of your ring die and roller shell ?

a.Ring die, two layers design with 24 hours heat treatment so quality is assured, and our ring die never attacked by roller shell so the service time is longer
b.Roller shell, NO BEARING INSIDE, so the wall of roller shell can be thicker, and we can do heat treament by 24 hours and keep carbon layer up to 3mm

14.What about after sales service ?

a.We can send engineers to your factory to teach your workers to operate and do the maintenace of pellet mill
b.You can send your engineers/workers to learn everything in our workshop

15.Whether the pellet mill can be used for RPF and RDF ?

Yes, with specially design, our pellet mill is good choice for RPF and RDF

16.Whether the pellet mill can be used for Hemp leaves of sensative temperature ?

Yes, with specially change for our pellet mill, it works 

17.Whether the pellet mill can be used for Alfalfa/Corn stalks pellets productions

Yes, good choice because the feeding chamber is bigger and capacity is much bigger than others. 


Product detail pictures:

Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS detail pictures

Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS detail pictures

Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS detail pictures

Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS detail pictures

Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS detail pictures

Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS detail pictures


Related Product Guide:

We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Cheap PriceList for Hard Wood Pellet Mill - Pellet Mill – OPPS, The product will supply to all over the world, such as: Eindhoven, Finland, Sri Lanka, The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
  • Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
    5 Stars By Ivy from Yemen - 2017.04.18 16:45
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Edwina from Bandung - 2018.02.04 14:13

    Related Products