Hab-Wood pellet Processing Plant
(Process to make more money)
• Wood Waxyaabaha: log Wood, chips Wood, Wood jirridda, iwm
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
Hab-Straw pellet Processing Plant
( Economical Feasible process)
• qaydhiin Waxyaabaha: Corn Straw, caws engegan oo kale gabbaldayaha, caws engegan oo kale masagada, caws engegan oo kale Paddy, iwm
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• Talaabada 2: Primary Hammer Mill (beddeli size si ay u size yar ka yar 10mm)
• Tallaabada 3: Pelleting iyo qaboojinta Station: halgalino ciidda miinshaar galay dhexroor 8mm size iyo kaabsal oo dhererkiisu hagaajin 20-40mm ah.
EFB pellet Processing Plant Geeddi-socodka
(habka abuurnimo)
• qaydhiin Waxyaabaha: EFB
• Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.