biomasa de combustibil

Procesul de pelete din lemn fabrica de prelucrare
(Process to make more money)

  Material din lemn: Case din Busteni, Așchii de lemn, din lemn Trunk, etc
 Moisture: 45-50% depends on the weather situation.
 Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
 Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
 Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
•  Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
 Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780

Procesul de paie Pellet Processing Plant
( Economical Feasible process) 

•  Materie primă: Porumb de paie, paie de floarea - soarelui, sorg paie, paie de orez, etc
•  Moisture: dried natually to 25% moisture roughly
•  Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
•  Pasul 2: Primar Hammer Mill (modificați dimensiunea la dimensiunea mai mică mai mică de 10mm)
•  Etapa 3: Granularea și răcire Stație: Se prelucrează praful de ferăstrău în diametru 8mm dimensiune si pelete lungime reglabile 20-40mm.

79-79-

Plant Processing EFB Pellet Process
(procesul de inovare)

•    Materie primă: EFB
•   Moisture: 50-55% depends on the previous process
  (whether EFB screw press is used)
•  Step 1: Use chipper(drum type) to shorten the size into 30-50mm
•  Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
•  Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
•  Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
•  Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780
模型

Trimite-ne mesajul tau:

Scrie aici mesajul tau si trimite-l la noi