Biomass د تیلو د

وود pellet د پروسس فابریکې د بهیر
(Process to make more money)

  وود مواد: ووډ يادښت، چند چپس، چند تنې، او نور
 Moisture: 45-50% depends on the weather situation.
 Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
 Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
 Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
•  Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
 Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780

د پروړو pellet د پروسس فابریکې د پروسې
( Economical Feasible process) 

•  خام مواد: د جوارو بوس، د لمر ګل واښه، او پخی بوس، paddy بوس، او نور
•  Moisture: dried natually to 25% moisture roughly
•  Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
•  لومړنۍ هامر فابريکې: 2 ګام (ته د کوچنیو د اندازې په اندازه لږ تر 10mm بدلون)
•  3 ګام: Pelleting او يخول مرکز: د ص په اندازه 8mm قطر او 20-40mm تعدیل اوږدوالی گرانول دوړو پروسه ده.

79-79-

EFB pellet د پروسس فابریکې د پروسې
(د نوښت د پروسې)

•    خام مواد: EFB
•   Moisture: 50-55% depends on the previous process
  (whether EFB screw press is used)
•  Step 1: Use chipper(drum type) to shorten the size into 30-50mm
•  Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
•  Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
•  Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
•  Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780
模型

خپل پیغام موږ ته واستوئ:

دلته خپل پیغام ولیکئ او موږ ته دا واستوي