OEM/ODM Factory Rdf (Refuse Derived Fuel)Recycling Machine - Continuous belt dryer – OPPS
OEM/ODM Factory Rdf (Refuse Derived Fuel)Recycling Machine - Continuous belt dryer – OPPS Detail:
Low temperature belt dryer capacity 1t/h (dry base/continous)
| Parameter | Specification |
| Continous Belt Dryer | one ton/h (continous) |
| Overal Dimension of dryer(LxWxH)(mm) | 35660x9800x4000 |
| Main Drying Body(mm) | 28170x4380x3150 |
| 5 layer+1 layer for dust automatic cleaning system | |
| Width available | 2760mm |
| Spreadth thicknss of material(mm) | 100mm-150mm |
| Drying time adjustable | 0.6-4 h |
| Capacity | 1T/H (dry base and continous) |
| Output for circulation fan | 148kw |
| Electric motor for conveyor | 6kw |
| Natural gas burner | 520 M Kcal |
| Capacity of Natural Gas Consumption | 650m3/h |
| Temperataure adjustable | Ambient–120℃ |
| Efficiency of drying | 97% |
| Eletric Motor | 460V/60HZ/UL |
Fundamental
The machine can use eletric, gas, LPG, Coal, Biological Particles, diesel and other energy heating. The working principle is that the air heated by the heat source in the hot air stove is blown by circulation fans into the inside of the drying cabinet body so that the moisture of the product is evaporated under the heat. Evaporated under this process, the generated moist air is discharged to the outside of the device with the exhaust pipe. The machine can continuously feed and make the material run smoothly. During the material conveying process, the gap is conveyed through the intermittent mesh belt to realize the turnover of the material and reach homogeneity of the heated air on all surfaces. It can connect with other equipment to achieve continuous operation. (The following is explanation of heat pump belt dryer)
Remarks: As above image shows: drying medium(ambient air) of high moisture is transfered by circulationg fan into the hot air pump(evaporator), during this process, the temparature of ambient air is lowed and moisture is dropped down as saturated air, then the air (drying medium) of lowest moisture and temperature is transfered to the condenser (hot air pump) to heat up the air. After this, the air (drying medium) of high temperature and low moisture is blowed into the raw material to dry raw material successfully.
1.Hot air stove heating energy can be natural gas, biomass pellet, Liquefied gas, LP.
5. Heating system, temperature-controlled muti-position design and high air circulation fan can make internal heat fully dispersed in every corner of the interior. Make sure there are no dead ends. Uniform temperature, ideal for air drying and drying products.
More Pictures:
Product detail pictures:
Related Product Guide:
We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for OEM/ODM Factory Rdf (Refuse Derived Fuel)Recycling Machine - Continuous belt dryer – OPPS, The product will supply to all over the world, such as: Mexico , Tunisia , Japan , Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
By Frank
from Honduras
- 2018.06.21 17:11
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By mary rash
from Romania
- 2018.09.23 17:37
