သစ်သားအတောင့်ထုတ်ယူခြင်းစက်ရုံလုပ်ငန်းစဉ်
(Process to make more money)
• ဝုဒ်ပစ္စည်း: Wood ကမှတ်တမ်း, Wood ကချစ်ပ်, Wood ကနှာမောင်း, စသည်တို့
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

ကောက်ရိုးအတောင့်ထုတ်ယူခြင်းစက်ရုံလုပ်ငန်းစဉ်
( Economical Feasible process)
• ကုန်ကြမ်း: ပြောင်းဖူး Straw, နေကြာကောက်ရိုး, sorghum ကောက်ရိုး, စပါးကောက်ရိုး, စသည်တို့
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• အဆင့် 2: မူလတန်း Hammer စက် (ဒီထက် 10 မီလီမီတာထက်သေးငယ်အရွယ်အစားအရွယ်အစားပြောင်းလဲပစ်)
• အတောင့်နှင့်အေးဘူတာ: အရွယ်အစား 8 မီလီမီတာအချင်းနဲ့ 20-40mm ချိန်ညှိအရှည်လုံးလေးများထဲသို့လွှဖုန်မှုန့်လုပ်ငန်းလုပ်ဆောင်မှုအဆင့်ဆင့် 3 ။

EFB တောင့်ထုတ်ယူခြင်းစက်ရုံလုပ်ငန်းစဉ်
(ဆန်းသစ်တီထွင်မှုလုပ်ငန်းစဉ်သည်)
• ကုန်ကြမ်း: EFB
•အ Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

