ຂະບວນການໄມ້ເມັດພືດປະມວນຜົນ
(Process to make more money)
•ການ ວັດສະດຸໄມ້: log ໄມ້, chip ໄມ້, ໄມ້ລໍາຕົ້ນ, ແລະອື່ນໆ
•ການ Moisture: 45-50% depends on the weather situation.
•ການ Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
•ການ Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
•ການ Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
•ການ Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
ເຟືອງເມັດພືດປະມວນຜົນຂະບວນການ
( Economical Feasible process)
• ວັດຖຸດິບ: Corn ເຟືອງ, ເຟືອງເຂົ້າ sunflower, sorghum ເຟືອງ, ເຟືອງເຂົ້າ, ແລະອື່ນໆ
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• ຂັ້ນຕອນທີ 2: ປະຖົມ Hammer Mill (ການປ່ຽນແປງຂະຫນາດຂອງຂະຫນາດຂະຫນາດນ້ອຍຫນ້ອຍກ່ວາ 10mm)
• ຂັ້ນຕອນທີ 3: ເມັດແລະເຮັດຄວາມເຢັນ Station: ຂະບວນການຝຸ່ນເຫັນເຂົ້າໄປໃນເສັ້ນຜ່າສູນກາງຂະຫນາດ 8mm ແລະ 20-40mm ຄວາມຍາວປັບ pellets.
EFB Pellet ປະມວນຜົນ Plant Process
(ຂະບວນການຄວາມຄິດສ້າງສັນ)
• ວັດຖຸດິບ: EFB
• Moisture: 50-55% depends on the previous process
•ການ (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
