바이오 매스 연료

목재 펠렛 가공 공장 프로세스
(Process to make more money)

  목재 재질 : 목재 로그, 목재 칩, 목재 트렁크 등
 Moisture: 45-50% depends on the weather situation.
 Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
 Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
 Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
•  Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
 Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780

밀짚 펠릿 가공 공장 프로세스
( Economical Feasible process) 

•  원료 : 옥수수 밀짚, 해바라기 밀짚, 사탕 수수 밀짚, 벼 밀짚 등
•  Moisture: dried natually to 25% moisture roughly
•  Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
•  차 해머 밀 : 2 단계 (10mm보다 적은 작은 크기로 크기를 변경)
•  펠리 및 냉각 역 : 3 단계 크기 8mm 직경 20-40mm 길이 조절 펠릿에 톱 먼지를 처리합니다.

79-79-

EFB 펠릿 가공 공장 프로세스
(혁신 과정)

•    원료 : EFB
•   Moisture: 50-55% depends on the previous process
  (whether EFB screw press is used)
•  Step 1: Use chipper(drum type) to shorten the size into 30-50mm
•  Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
•  Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
•  Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
•  Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780
模型

메시지를 보내주십시오:

여기에 메시지를 작성하여 보내주십시오