Wood Pellet nhazi Plant Usoro
(Process to make more money)
• Wood ihe: Wood log, Wood ibe, Wood ogwe, etc
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
Ahịhịa Pellet nhazi Plant Usoro
( Economical Feasible process)
• Raw ihe: Ọka ahịhịa, sunflower ahịhịa, sorghum ahịhịa, paddy ahịhịa, etc
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• Nzọụkwụ 2: Primary Hammer Mill (ịgbanwe size ka obere size erughị 10mm)
• Nzọụkwụ 3: Pelleting na Jụrụ Station: usoro ndị hụrụ uzuzu size 8mm dayameta na 20-40mm mgbanwe ogologo pellets.
EFB Pellet nhazi Plant Usoro
(ọhụrụ usoro)
• Raw ihe: EFB
• Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
