Pwosesis Bwa I Grenn Processing Plant
(Process to make more money)
• Materyèl Wood: Bwa boutèy demi lit, bato Wood, Wood Trunk, elatriye
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

Paille I Grenn Processing Plant Pwosesis
( Economical Feasible process)
• Anvan tout koreksyon Materyèl: mayi Paille, pay flè solèy, sorgo pay, Paddy pay, elatriye
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• Etap 2: Prensipal Hammer Mill (chanje gwosè a nan pi piti gwosè mwens pase 10mm)
• Etap 3: anrobaj Et Refroidissement Station: Pwosesis pousyè tè a te wè nan dyamèt gwosè 8mm ak 20-40mm granules longè reglabl.

EFB I Grenn Processing Plant Pwosesis
(pwosesis inovasyon)
• Anvan tout koreksyon Materyèl: EFB
• Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

