Biomass wahie

Wood anaʻana, aaioee Plant Hoʻokō '
(Process to make more money)

• Ka   Wood Material: Wood log, Wood inoaia, Wood kumu nei, a pela aku
• Ka  Moisture: 45-50% depends on the weather situation.
• Ka  Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Ka  Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Ka  Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
•  Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Ka  Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780

Ka mauu maloo anaʻana, aaioee Plant Hoʻokō '
( Economical Feasible process) 

•  heʻiʻo maka nō Material: ai ka mauʻu maloʻo, pua nānālā mauʻu maloʻo, sorghum mauʻu maloʻo, paddy mauʻu maloʻo, a pela aku
•  Moisture: dried natually to 25% moisture roughly
•  Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
•  KaʻAnuʻu Hana 2: n Hammer Mill (hoʻololi i ka mea nui i uuku ka nui emi ma mua o 10mm)
•  kaʻAnuʻu hana 3: Pelleting a anuanu Station: kaʻina hana i ka pahiolo lepo i loko o nui 8mm anawaena a me ka 20-40mm hoʻoneʻe loa pellets.

79-79-

EFB anaʻana, aaioee Plant Hoʻokō '
(HOU kaʻina)

•    heʻiʻo maka nō Material: EFB
• He kaʻina   Moisture: 50-55% depends on the previous process
• Ka   (whether EFB screw press is used)
•  Step 1: Use chipper(drum type) to shorten the size into 30-50mm
•  Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
•  Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
•  Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
•  Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.

780
模型

E hoʻouna i kāu leka iā mākou:

E kākau i kou manaʻo ma 'aneʻi, a hoouna aku ia ia mai