Good User Reputation for Fender Flares For Tundra - Supercritical CO2 Hemp oil Extraction – OPPS
Good User Reputation for Fender Flares For Tundra - Supercritical CO2 Hemp oil Extraction – OPPS Detail:
Data of supercritical CO2 CBD oil Extraction
300L (50LX6) | ||
No. | Main Configuration | Parameters |
1 | Extraction Tank | Volume:50L(6 tanks),Max Working Pressure: 35Mpa |
2 | Seperation Tank | Volume: 3X20L Pressure: 30Mpa. |
3 | pump | CO2 high-pressure pump&Co-solvent pump |
4 | Cooling system | Temperature range: -5℃-+5℃ |
5 | Heating Exchange System | Max Working Pressure: 30Mpa |
6 | Purification System | Max Working Pressure: 16Mpa |
7 | CO2 Storage Tank | Max Working Pressure: 16Mpa |
8 | Safety Devices | Pressure gauge at high pressure pump outlet over pressure protection, The extractor, separator, evaporator, dry purifier and mixer has saftey valve to keep safe of system |
9 | Power Consumption | 101.5kw |
10 | Temperature control system | Temperature range: room temperature-75℃ |
11 | User-Supplied | Installation dimension: 8000mmx4500mmx4500mm, CO2: Food Grade: 99.9%, singer bottle net weight 22kgs, power: 3 phase |
300L (150LX2) | ||
No. | Main Configuration | Parameters |
1 | Extraction Tank | Volume:150L(2 tanks),Max Working Pressure: 35Mpa |
2 | Seperation Tank | Volume: 3X20L Pressure: 30Mpa. |
3 | pump | CO2 high-pressure pump&Co-solvent pump |
4 | Cooling system | Temperature range: -5℃-+5℃ |
5 | Heating Exchange System | Max Working Pressure: 30Mpa |
6 | Purification System | Max Working Pressure: 16Mpa |
7 | CO2 Storage Tank | Max Working Pressure: 16Mpa |
8 | Safety Devices | Pressure gauge at high pressure pump outlet over pressure protection, The extractor, separator, evaporator, dry purifier and mixer has saftey valve to keep safe of system |
9 | Power Consumption | 101.5kw |
10 | Temperature control system | Temperature range: room temperature-75℃ |
11 | User-Supplied | Installation dimension: 6000mmx4800mmx6000mm, CO2: Food Grade: 99.9%, singer bottle net weight 22kgs, power: 3 phase |
600L (150LX4) | ||
No. | Main Configuration | Parameters |
1 | Extraction Tank | Volume:150L(4 tanks),Max Working Pressure: 35Mpa |
2 | Seperation Tank | Volume: 3X20L Pressure: 30Mpa. |
3 | pump | CO2 high-pressure pump&Co-solvent pump |
4 | Cooling system | Temperature range: -5℃-+5℃ |
5 | Heating Exchange System | Max Working Pressure: 30Mpa |
6 | Purification System | Max Working Pressure: 16Mpa |
7 | CO2 Storage Tank | Max Working Pressure: 16Mpa |
8 | Safety Devices | Pressure gauge at high pressure pump outlet over pressure protection, The extractor, separator, evaporator, dry purifier and mixer has saftey valve to keep safe of system |
9 | Power Consumption | 160.5kw |
10 | Temperature control system | Temperature range: room temperature-75℃ |
11 | User-Supplied | Installation dimension: 9000mmx6000mmx5300mm, CO2: Food Grade: 99.9%, singer bottle net weight 22kgs, power: 3 phase |
Data of short path distillation system
No. | Material | Model | Stage | Evaporating Area | Input Capacity |
1 | stainles steel | CSS-2-2 | two stage | 2m2 | 50-100l/h |
2 | stainles steel | CSS-3-2 | Three stage | 2m2 | 50-100l/h |
3 | stainles steel | CSS-3-3 | Three stage | 3m2 | 100-150l/h |
4 | stainles steel | CSS-2-5 | Two stage | 5m2 | 200-250l/h |
5 | stainles steel | CSS-3-5 | Three stage | 5m2 | 200-250l/h |
Specification
Part No. | Description | Techanical Specification | Qty | Remark |
Vessel | Extraction Vessel | Volume: 400L Designed Pressure: 35MPa, working Pressure: 32MPa Designed temperature: 85℃ Basket Volume: 550L | 3 | With watering jacket, setting pressure detection point and temperature detectio point at the inlet/outlet. Can control the temperture and pressure inside the extraction vessel automatically, the pressure in the extractor is always in the range of the extraction process parameters, and there are temperature and pressure sensor set on the CO2 pipe line entrance and exit. the working temperature is 10-80 ℃ |
opening device of extraction vessel | 3 | Clamp-type hydraulic quick open structure and is equipped with safety interlock mechanism | ||
#1 Separation Vessel | Volume: 300L Designed Pressure: 20MPa, Working Pressure: 18Mpa, Designed Temperature: 85 ℃ | 1 | Equipped with the water jacket, there are safety valve, exhaust valve, pressure gauge at the outlet end of the vessel, there are extended tangential air inlet on top of the vessel. And set the temperature detection point at the inlet end, can control the temperature of the CO2. | |
#2 Separation Vessel | Volume: 200L Designed Pressure: 12MPa, Working Pressure: 11Mpa, Designed Temperature: 85 ℃ | 1 | Equipped with the water jacket, there are safety valve, exhaust valve, pressure gauge at the outlet end of the vessel, there are extended tangential air inlet on top of the vessel. And set the temperature detection point at the inlet end, can control the temperature of the CO2. | |
Fractionating Tower | Volume: 400L Designed Pressure: 35MPa, Working Pressure: 32Mpa, Designed Temperature: 85 ℃ Total 4 section | 1 | Equipped with the water jacket, there are safety valve, exhaust valve, pressure gauge at the outlet end of the vessel, there are extended tangential air inlet on top of the vessel. And set the temperature detection point at the inlet end, can control the temperature of the CO2. (make the distillation position range according to the process | |
intermediate Tank | Volume: 300L Designed Pressure: 9.8MPa, Designed Temperature: 5-55 ℃ | 1 | made by stainless steel 304, equipped with live level indicator, outfall evacuation port, safety valve, pressure gauge, temperature sensor interface at CO2 inlet and outlet, and equipped with heat(cooling) water jacket, make sure the tank is always in the liquid CO2 temperature. | |
Tall Gas Tank | 300L, 9.9Mpa | 1 | made by stainless steel 304 | |
outdoor CO2 Tank | Designed Pressure: 2.26Mpa, Working Pressure: 2.16Mpa, Volume: 30m3, Inner tube material: 16MnDr | 1 | Vacuum double layer pearly sand insulation, Vertical Cryogenic tank | |
Valve | High Pressure Control Valve | 35Mpa, 20Mpa | 4 | Original Brand Emerson, Pneumatic Control, Material: SS304 |
High Pressure Shut-off Valve | Pressure: 5-55Mpa | material: SS304 | ||
Ball Valve(Water Line) | material: SS304 | |||
Solenoid Valve | Control the water temperature | DC24V | ||
Safety Valve | material: SS304 | |||
Check Valve | material: SS304 | |||
pipe line | High Pressure Pipe Line | Extraction seperation pressure piping | material: SS304 | |
Low Pressure Pipe Line | process water piping | material: SS304 | ||
Fitting | Elbows, reducers, union,Three-way joints, pressure(unpressurized) flanges, bolts, nuts, soft pick etc. | material: SS304 | ||
pump and air Compressor | CO2 High Pressure Pump | Max Flow Rate: 5000l/h, outlet pressure: 35MPa | China made, flow rate fequency adjustment ceramic plunger, self circulation cooling pump, the pump head with a cooling system, over current protection, material is ss304 | |
Carry Agent pump | Max flow rate: 400L/H, outlet pressure: 35Ma | 1 | China made, flow rate fequency adjustment over current protection, material is ss304 | |
CO2 Transportation pump | Max flow rate: 900L/H, outlet pressure: 8Ma | 1 | China made, flow rate fequency adjustment over current protection, material is ss304 | |
Cooling water pump | 3 | Cooling water circle | ||
Cooling water pump | 3 | Hot water circle | ||
Recovery compressor | inlet pressure: 6MPa | 1 | China made, over current protection, material is ss304 | |
Air Compressor | Discharge rate 0.5M3 | 1 | ||
Cooling System | Water Chiller | Cooling capacity of 150,000 Kcal | 1 | Water-cooled compressor |
Cold Water Tank | 2m3 | 1 | material: SS304 | |
Condenser | Designed pressure: 9.8MPa. Working pressure: 9MPA | 1 | material: SS304 | |
Heating System | Extraction Heaters | Designed Pressure: 35MPa, Working Pressure: 32MPa | 2 | material: SS304 |
Heater for #1 Separation | Designed Pressure: 20MPa, Working Pressure: 18MPa | 1 | material: SS304 | |
Heater for #2 Separation | Designed Pressure: 12MPa, Working Pressure: 11MPa | 1 | material: SS304 | |
Electric Heating Boilers | 1 | including soft water treatment device | ||
Hot water tank | 2m3 | 1 | material: SS304 | |
Hoist | 2.5T | 1 | Chain Hoist | |
Control System | PLC Control System | With Control Software, Control Program | 1 | Siemens |
Lower voltage electric parts | include circuit breakers, contactors, inverters, etc | 1 | Delt Inverter 2 Pcs |
Product detail pictures:
Related Product Guide:
We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for Good User Reputation for Fender Flares For Tundra - Supercritical CO2 Hemp oil Extraction – OPPS, The product will supply to all over the world, such as: Hyderabad , Malta , Lesotho , Our products are very popular in the word, like South American, Africa, Asia and so on. Companies to "create first-class products" as the goal, and strive to deliver customers with high quality solutions, present high-quality after-sales service and technical support, and customer mutual benefit, create a better career and future!
By Sabina from Southampton - 2018.06.28 19:27
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Mona from New Orleans - 2017.10.25 15:53
Send your message to us:
Write your message here and send it to us