Proceso de madeira pelotização Processing
(Process to make more money)
• Material Madeira: rexistro de madeira, aparar de madeira, tronco de madeira, etc
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
Proceso vexetal Procesamento de palla Pellet
( Economical Feasible process)
• Materia prima: Maíz palla, palla de xirasol, sorgo palla, palla de arroz, etc.
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• Paso 2: Imprimación muíño de martelo (cambiar o tamaño de menor tamaño inferior a 10 mm)
• Paso 3: granulação e estación de refrixeración: procesar o po de serra en tamaño de diámetro de 8 mm e pelotas de lonxitude axustable 20-40 mm.
Fábrica de tratamento do EFB Pellet proceso
(proceso de innovación)
• Materia prima: EFB
• Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
