Processus de granules de bois Usine de transformation
(Process to make more money)
• Matériau bois: bûche de bois, copeaux de bois, bois Tronc, etc.
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
Processus Straw pellets usine de transformation
( Economical Feasible process)
• Matière première: Maïs paille, de la paille de tournesol, de la paille de sorgho, la paille de riz, etc
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• Étape 2: Primaire broyeur à marteaux (changer la taille de plus petite taille inférieure à 10 mm)
• Etape 3: granulation et de la station de refroidissement: Traiter la poussière de scie dans la taille de diamètre de 8 mm et des pastilles de longueur réglable 20-40mm.
EFB pellets traitement Usine de traitement
(processus d'innovation)
• Matière première: EFB
• Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
