Proceso de Planta de Procesamiento de pellets de madera
(Process to make more money)
• Material Madera: Registro de madera, virutas de madera, la madera del tronco, etc.
• Moisture: 45-50% depends on the weather situation.
• Step 1: Use wood chipper(disc type/drum type) to chip into 30-50mm
• Step 2: Primary Hammer Mill (change the chips to smaller size 10-20mm)
• Step 3: Three Pass Rotary Dryer (To dry the smaller size of Wood Chips to 18% moisture )
• Step 4: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
Proceso de Planta de procesamiento de paja Pellet
( Economical Feasible process)
• Materia prima: Maíz paja, paja de girasol, paja de sorgo, paja de arroz, etc
• Moisture: dried natually to 25% moisture roughly
• Step 1: Use grinder(tub grinder type) to grinde into 6--125mm
• Paso 2: Primary molino de martillo (cambiar el tamaño a un tamaño más pequeño de menos de 10 mm)
• Paso 3: granulación y de enfriamiento de la estación: procesar el polvo sierra en diámetro de tamaño de 8 mm y gránulos de longitud ajustable 20-40mm.
Planta de procesamiento de EFB de pellets de proceso
(proceso de innovación)
• Materia prima: EFB
• Moisture: 50-55% depends on the previous process
• (whether EFB screw press is used)
• Step 1: Use chipper(drum type) to shorten the size into 30-50mm
• Step 2: Belt Dryer (To dry the EFB fiber to 18% moisture and oil content can be lowered down )
• Step 3: Secondary Hammer Mill (To make sure the saw dust size will be lower than 5mm)
• Step 4: Mixer (to mix the wood saw dust with EFB fiber to lower down S Content.
• Step 5: Pelleting and Cooling Station: Process the saw dust into size 8mm diameter and 20-40mm adjustable length pellets.
